Screw plug immersion HEATERS | EHK series

stainless steel, with thermostat

 

  • Screw plug immersion heater consisting of brass connector
    G 1 1/2
  • With 3 U-shaped hard-soldered immersion heaters tubes
    Ø 8,5 mm
  • 3-pole adjustable thermostat 0-85 °C
    (alternatively 30-110 °C), 16 amp
  • Screw-in heating element with zinc-plated steel hood
  • IP 30 / IP 54 / IP 65 (internal setting only)
  • For capacities of 11 kW and above: with singel-pole thermostat (for contactor control) and second cable entrance M16

Technical data: Screw plug immersion heater with temperature controller

 

Cat No.

Immersion depth
(built-in length)
(mm)
Voltage
(Volt)
Capacity
(Watt)
Watt density
(W/cm²)
Weight
(kg)
11212020 200 230/400 1500 5,9 1,48
11212025 250 230/400 2000 6,0 1,55
11212035 350 230/400 3000 6,0 1,70
11212045 450 230/400 4500 6,9 1,85
11212065 650 230/400 6000 6,2 2,15
11212065 650 230/400 9000 9,2 2,15
11212080 800 230/400 9000 7,4 2,38
11212100 1000 3x400 12000 7,9 2,68


Sheath material: 1.4541, 1.4571, 1.4828, 1.4876, 2.4858

Available on request:
other lengths and heating capacities, unheated zones, other voltages, materials and connector sizes. Different temperature controller and limiter are available.